Hardware stamping refers to the mold for steel / non-ferrous metal and other sheet materials, which is formed into a specified shape by a press at the room temperature. Compared with other methods of mechanical processing and plastic processing, stamping parts processing has many unique advantages in both technical and economic aspects.

The main performance of metal stamping parts is as follows:

1. Metal stamping can process parts with a large size range and more complex shapes, such as small stopwatches for watches and clocks, car beams, covers, etc., plus the cold deformation and hardening effect of materials during metal stamping. Both strength and stiffness are high.

2. During metal stamping, because the mold guarantees the size and shape accuracy of metal stamping parts, and generally does not damage the surface quality of the stamping parts, and the life of the mold is generally long, the quality of metal stamping is stable, the interchangeability is good. Exactly the same. "

3. Metal stamping generally does not generate chips and scraps, consumes less material, and does not require other heating equipment. Therefore, it is a material-saving and energy-saving processing method, and the cost of metal stamping parts is low.

4. The metal stamping process has high production efficiency, convenient operation, and easy realization of mechanization and automation. This is because metal stamping relies on dies and stamping equipment to complete processing. The stroke times of ordinary presses can reach dozens of times per minute, and high-speed pressure can reach hundreds or even thousands of times per minute, and each stamping stroke It is possible to get a punch.